Bell EXPRESSVU 3700 Installation Guide download pdf (Page 69)

Installation Guide

CONNECT RECEIVER TO TELEPHONE CONNECTION

Your Bell ExpressVu receiver(s) must be connected to a telephone line at all times.

To connect your receiver to a phone line, plug one end of the telephone cord provided

to the connection at the back of the receiver, and plug the other end into an active

telephone jack.

The telephone connection is required for several features, including some remote

diagnostics; the use of multiple receivers in the same household at no additional monthly

charge; and pay-per-view (PPV) purchases. In the case of multiple receivers in the same

household, all of the receivers must be connected to phone lines with the same telephone

number.

The receiver calls Bell ExpressVu’s Customer Service Call Centre on a regular basis.

These calls use a toll-free number and will not appear on your telephone bill. The

receiver will never interrupt your own telephone calls. If you try to make a call while the

receiver is using the line, the receiver will immediately hang up and try its call later.

HOW TO TEST THE SYSTEM

HOW TO START ANY TEST

Remote

Buttons Menu Options

1. Press the Menu.

2. Select the System Setup option.

3. Select the Diagnostic option.

4. Select the option for the test you want to do.

HOW TO TEST THE TELEPHONE CONNECTION

1. Make sure that an active telephone line is connected to the Phone Jack on the

receiver back panel

2. Select the Connection option. The receiver displays a

message that asks you to wait until the test is done.

• If the telephone connection is correct, the receiver displays

a message that says so.

• If the receiver displays a message that says it needs to make

a toll-free call to the Customer Service Center, select the

Dial Out option. The receiver displays a message that asks

you to wait until the call is done. When the call is done,

select the Cancel option.

• If the telephone line is not connected properly, the receiver

displays a message that says so. In this case, check the

telephone connection and then repeat the test.

Page I-54

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 82 83

No comments

Bell EXPRESSVU 3700 Installation Guide Page 69