Bell EXPRESSVU Technical Information download pdf (Page 45)

Page 3-45

Using The System

Using Dolby

Surround Sound

USING DOLBY

SURROUND SOUND

Dolby Digital gives you the capability to enjoy programs in surround sound. An external

decoder is required to enjoy this feature. Refer to your decoder user’s guide.

Note: Not all programs contain a Dolby Digital sound track.

The receiver uses an optical port for outputting digital audio. The optical output can

provide two audio data types: Dolby Digital and Linear PCM (only Dolby Digital can

provide full 5.1-channel sound).

Remote

Buttons Menu Options

1. Connect an external Dolby Digital decoder

to the receiver's back panel Digital Audio

Output using an optical cable (available at

consumer electronics stores).

2. Press MENU, select System Setup (6),

and then Dolby Digital (7) to open the

Dolby Digital Setup screen.

3. Select one of the following optical output

options:

• Dolby Digital Only - Select this option

if the stereo system or amplifier can

decode only Dolby Digital and will not

process Linear PCM signals. See your

amplifier's owner's manual for more

details on the amplifier (and see the

following table).

• PCM Only - Select this option only if

the stereo system or amplifier cannot

decode Dolby Digital signals.

• Dolby Digital/PCM - Select this option only if the stereo system or amplifier can

decode both Dolby Digital and Linear PCM signals.

4100_Ch3_eng 6/15/05 8:34 AM Page 45

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 55 56

No comments

Bell EXPRESSVU Technical Information Page 45